The Wilckens primer in white is a low-odor synthetic resin primer, which is well suited as a covering and filling base and intermediate coat. The primer is suitable for indoor and outdoor use, flows well and dries very quickly. It is characterized by easy processing and good sandability and is particularly suitable for base and intermediate coats on wood and metal (e.g. doors, windows, furniture, grilles, etc.).
Processing instructions: The surface must be clean, dry, free of grease and stable. Loose parts of the paint and unstable substrates must be removed, well-adhering old paints must be sanded thoroughly (wear a dust mask), and metal surfaces must be thoroughly removed from rust. Stir well before use and apply evenly. Do not use at temperatures below +8°C or in high heat (sunlight). When processing several containers, ensure that the batches are the same.
1. Paint structure on wood, inside and outside
a) Prepare the substrate accordingly
b) impregnate raw wood outside with wood primer (blue stain protection)
c ) 1 coat of primer
d) 1 – 2 thin coats of colored or white paint
2. Paint structure on metal (iron)
a) Prepare the substrate accordingly
b) Degrease light metal and zinc, remove oxidation deposits and pre-treat with Allgrund
c) Prime the iron with rust primer or Allgrund
d) if necessary 1 coat of primere) 1-2 coats of thin coats of colored, white or radiator paint ;
3. Paint build-up on old paints or renovation paint
a) Prepare the substrate accordingly
b) Sand old paints thoroughly (wear a dust mask), apply wood primer or rust protection primer or Allgrund to damaged areas prime
c) if necessary 1 coat of primer
d) 1 – 2 thin coats of colored, white or radiator paint
General information: Store in a cool, but frost-free place. Only empty containers for recycling. Dispose of liquid material residues at the collection point for used paint. Please secure the container against tipping over and leaking during transport. Please refer to the safety data sheet for information on hazards and safety precautions. Please contact your dealer.
When painting depending on the surface, the drying time is (at +20°C, 65% relative humidity):Lower temperatures and higher humidity extend the time Drying times.
Consumption:
approx. 10 - 12 m²/liter | Sufficient for approx. 25 - 30 m²
Caution/Danger:Liquid and vapor flammable. Contains sensitizing substances. Can cause allergic reactions. Always read the label and product information before use.
