Wilckens Waterproof Paint for Swimming Pools Green | 2,5 litre

Wilckens' Waterproof Paint for Swimming Pools is a CC cover colour for outdoor swimming pools. This special coating for concrete pools and other concrete substrates is fast drying, scratch-resistant, chemically resistant and easy to apply. A durable and reliable protective varnish with high colour and gloss stability and very good lightfastness.

Processing advise: Please read the product labeling carefully before you use this product and follow the dangers and safety instructions.

1. Prime coat:
Treat mineral substrates once with diluted swimming pool paint (add approx. 5 % thinner). Fill any cracks or holes in the concrete with a fine concrete mix. Do not paint over asphalted and tarred joints.
2. Final coat:
Apply 2 x swimming pool paint undiluted
3. Renovation coat:
Sand well preserved old coats (wear dust mask), clean and coat 1 - 2 times. Remove cracked and chipped coatings completely and proceed as described under new coating.
Recommended layer thickness: approx. 20 - 30 Î¼m per coat
The layer thickness that can be applied to vertical surfaces in a single operation depends on the coating process, the temperature, the roughness of the substrate, the shape of the object and other factors.

Danger/Caution: Flammable liquid and steam. - Causes skin irritation. Causes severe eye irritation. - May cause allergic skin reactions. - May cause respiratory irritation. - May cause damage to organs by prolonged or repeated exposure. - Toxic to aquatic organisms, with long-term effects. - Keep away from heat, hot surfaces, sparks, open flames and other sources of ignition. Do not smoke. - Do not breathe vapour. - Use only outdoors or in well-ventilated areas. - Avoid release into the environment. - Wear protective gloves/ protective clothing/eye protection/face protection. - IF INHALED: Move person to fresh air and allow unrestricted breathing. - IN CONTACT WITH EYES: Rinse gently with water for several minutes. Remove existing contact lenses if possible. Continue rinsing. - If you feel unwell, seek medical advice/attention. - If skin irritation occurs: Seek medical advice/attention. - If skin irritation or rash occurs: Seek medical advice/attention. - If eye irritation persists: Seek medical advice/attention. - Remove contaminated clothing. - Absorb spills. Keep container tightly closed in a well-ventilated place. If medical advice is required, have the container or label ready. Keep out of the reach of children.

Safety data sheets can be found under Info-Download.

Product type: Waterproof Paint for Swimming Pools green
Volume: 2,5 litre - 1 litre is sufficient for approx. 10 m² (for one coat, depending on the absorbency of the substrate)
Application: outdoor
Characteristics: silk gloss, resistant to chemicals, quick-drying, scratch-resistant, very good adhesion, high colour and gloss stability, for swimming pools made of concrete, excellent light fastness, weather resistant (VOB part C DIN 18363
The drying time depends on the substrate (at 20°C, 65% rel. humidity): dust dry / grab dry: approx. 5 hours, workable dry: approx. 16 hours, completely dry and reliable: approx. 7 days

Lower temperatures and higher humidity increase the drying time!