Wall paint Herbol Zenit Power super opaque white 12,5L

Wall paint Herbol Zenit Power super opaque white 12,5L

Item number: 13020500
Manufacturer: Akzo Nobel Deco GmbH
Brand Name:

€99.99

(Base price: €8.00/liter) incl. tax + shipping**

(ready for shipping 1-3 working days)

You have a question?

1 Rating (5 of 5)

Zenit Power interior wall paint in white from Herbol

Herbol Zenit Power is a modern interior wall paint of the highest opacity class, which is why one coat is often sufficient. The excellent application properties and the long open time ensure a cloth-matt, high-quality coating result with optimum recoatability. In addition, the paint offers fast and excellent application due to its creamy, slippery consistency. The wall paint is solvent- and plasticiser-free as well as low-emission and low-odour and is therefore ideally suited for sensitive living areas, but also for hospitals, old people's homes, hotels, restaurants, offices, schools, kindergartens and doctors' surgeries as well as for allergy sufferers.

Processing:

The substrate must be solid, even, clean, load-bearing, free from efflorescence, fungal attack, floury grain layers, sintered layers and separating agents. The substrate should be cleaned beforehand. Thoroughly remove non-intact and unsuitable coatings. Sand and clean smooth and dense substrates. Professionally fluoridate any rendered areas. Prime and/or intermediate coat the substrate as required. Prime first, depending on the substrate. For high-contrast, highly absorbent or differently absorbent substrates, additionally apply an intermediate coat of Herbol Zenit Power, max. 10 % by volume diluted with water. Subsequently, apply a rich and even coat of Herbol Zenit Power. To avoid deposits, work quickly wet-on-wet. Clean tools with water immediately after use.

Consumption:

approx. 120 - 140 ml/m² per coating.

Colour: white

Contents: 12.5 L (sufficient for approx. 100 m²)

Yield: approx. 8 m²/litre, for one coat, depending on the condition / absorbency of the substrate.

Drying time: can be recoated after approx. 2 - 3 hours, completely dry after approx. 2 - 3 days

Characteristics: for interior use, wet abrasion class 1, hiding power class 1, cloth matt, solvent-free, plasticizer-free, low-emission, low-odour, airless sprayable