With PUFAS Stripper intensive P15, all synthetic resin and acrylic paints, oil paints, glazes, dispersion and latex paints can be quickly and easily stripped from solvent-resistant surfaces. Wood, metal and masonry substrates are not damaged. A stripping test should be carried out on substrates that are sensitive to solvents (plastics, etc.) and exotic woods.
Apply
PUFAS Intensive Stripper P15 generously with a brush and leave to take effect. Depending on the material to be stripped, the exposure time is between 15 and 30 minutes; for critical coatings up to several hours (in this case cover the surfaces with a plastic film). Remove the swollen layer of paint with a filler. In the case of very thick layers of paint, it may be necessary to repeat the process after removing the top layer. Then wash the surface thoroughly with water and a brush or sponge and let it dry.
Danger/Warning: Extremely flammable aerosol. Pressurized container: May burst if heated. Causes serious eye irritation. May cause drowsiness and dizziness. Repeated exposure may cause skin dryness or cracking. If medical advice is needed, have product container or label at hand. Keep out of the reach of children. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. Do not smoke. Do not spray on an open flame or other ignition source. Do not puncture or burn, even after use. Do not inhale aerosol. Protect from sun exposure. Do not expose to temperatures above 50 °C. Dispose of contents/container in accordance with local regulations. Without adequate ventilation formation of explosive mixtures possible. Use exclusively according to purpose
You can find safety data sheets under Info-Download.
