The white Wilckens bath and kitchen paint is a dispersion colour, which has fungicidal properties and offers a mold-inhibiting effect. This makes Wilckens interior paints particularly suitable for renovation work and for coatings in damp rooms, such as bathrooms and kitchens. In addition, the bathroom and kitchen colours can also be used in rooms with insufficient ventilation possibilities.
Application technology and Paint Build-Up: All surfaces must be clean, dry, free of oil, grease and load-bearing. Completely remove existing fungal and mould infestation by brushing, scraping or washing off, if necessary with fungicidal washing solution (green film remover or similar). Remove old coats that are not sustainable and that are leavin'. Wash off glue paints and chalking surfaces completely. Prime critical and highly absorbent substrates with a plaster primer or deep primer (solvent-free). Stir bath and kitchen paint well and distribute evenly. For the primer coat, dilute the bathroom and kitchen paint with up to 10 % water. After approx. 4 - 6 hours, apply 1 to 2 top coats undiluted.
Danger/Caution: Store in a cool, but frost-free place - Keep out of the reach of children - If medical advice is required, have packaging or identification label ready - Do not inhale spray and mist - Wood preservativesP2 for grinding work - Ensure good ventilation during processing and drying - In case of contact with eyes or skin, rinse immediately with plenty of water - Do not discharge into drains, Do not eat, drink or smoke while using the paint - Wear suitable protective clothing, gloves and goggles - Do not process at temperatures below + 5°C - Only return empty containers for recycling, liquid material residues to the collection point for old paints.
Safety data sheets can be found under Info-Download.
The drying time depends on the substrate (at 20°C, 65% rel. humidity):
Lower temperatures and higher humidity increase the drying time!
