Wax-containing hardwood floor care treatment Dr. Schutz Wood & Cork Floor Polish

Name: Dr. Schutz wood scratch protectant wood floor treatment
Brand: Dr. Schutz
SKU: 78015766
Price: 8.25 EUR
Availability: InStock

Dr. Schutz Wood & Cork Floor Polish gives every hardwood floors treated with a water-resistant stain-finish lacquer a new shine. It can be used as a care treatment or to restore the shine in your flooring. The metal-free and wax-containing polymer dispersion is also a protectant against scratches. The polish also helps to revive older and dull looking wood and cork floors and protects them with a silky protective layer. You can also apply it to PVC and Linoleum flooring.

Before the care treatment can be applied, the floor should be cleaned thoroughly. If the the floor is damaged severely, it must to be restored before applying the treatment.

Application of Dr. Schutz Wood & Cork Floor Polish:

The floor should be cleaned and dried thoroughly. Shake the product well before use and apply the solution undiluted in a thin and even layer onto the floor using the Polish Applicator System or a non-felting, wide-headed wiper mop in the direction of installation. Another layer may be applied to increase protetcion, once the product has dries down enough to walk on. The product is self-drying and does not need to be polished after drying. Before using the floor again, it needs to dry for at least 12 hours. The protection of wood and cork floors is maintained if Wood & Cork Floor Polish is applied regularly after a thorough cleaning.

The cycle is dependent on the usage of the flooring:

Floors subjected to low levels of wear and tear (e.g., in living rooms and bedrooms, offices not open to the public) once or twice per year.
Floors subjected to medium-to-high levels of wear and tear (e.g., in corridors, on staircases, in offices open to the public) approximately every 3 to 6 months as required, in areas subjected to extreme wear and tear even more frequently.
Floors subjected to extreme wear and tear (e.g., in restaurants and pubs, shops, department stores, schools and for dance floors) every 4 to 8 weeks, in areas subjected to even more extreme wear and tear even more frequently.

Note:

Do not apply in direct sunlight and draught. Also, turn off the underfloor heating before using.
During application or drying time, the floor, as well as product temperature, may not fall under +15°C
If diluted at a 1:100 ratio it may also be used for regular cleaning purposes.
The extreme build-up of caring products shall be avoided.
Polishing with a high-speed-mashine is possible after drying.
The tools used to apply the solution should be cleaned thoroughly with water.

Consumption:

Initial Protection/refreshing: 20- 25 ml/m² per application

Care - Your wood and cork floors shine in a new light and are perfectly protected against scratches thanks to the residual, silky protective film
Easy application - Apply care treatment evenly with a suitable mop. Afterwards, let dry for 12 hours. The consumption is 20- 25 ml/m² per application
Longlasting protection – Give old and dull looking floors a new life. Reapply after every thorough cleaning. Should be used for maintaining the value of your hardwood
Extremely versatile – can not only be used for wood & cork floors, but also for PVC and linoleum flooring