Fast-drying isolating spray for easy isolating stains on ceilings and walls indoors and outdoors. Areas of application: PUFAS insulating spray isolates all stains that can penetrate when covered with dispersion paint and cannot be permanently covered by simply spraying on. For example, felt and copying pens, grease, bitumen, nicotine, water, tar, soot and burn stains are isolated and can no longer be removed by subsequent coats of paint.
Subsurface preparation: The subsurface must be stable and permanently dry. PUFAS insulating spray must not be used on surfaces that can be attacked by solvents.
Processing: Shake the can vigorously before use. Spray the stains to be isolated from a distance of approx. 20 cm. If necessary, repeat the spraying process once more after it has dried completely (approx. 10 minutes). After 10 minutes drying time, the isolated dirt can be painted over with dispersion paint or wallpapered over.
Safety information: Extremely flammable aerosol. Pressurized container: May burst if heated. Harmful to aquatic organisms, with long-term effect. Causes skin irritation. May cause drowsiness and dizziness. Keep out of the reach of children. Use only outdoors or in a well-ventilated area. Do not spray on an open flame or other ignition source. Avoid breathing vapour/aerosol.
Wear protective gloves/eye protection. IF INHALED: Remove person to fresh air and keep comfortable for breathing. IF IN EYES: Rinse cautiously with water for several minutes. If possible, remove contact lenses. Continue rinsing. IF ON SKIN: Wash with plenty of soap and water. If medical advice is needed, have product container or label at hand. Avoid release to the environment. Dispose of contents/container to hazardous waste disposal in accordance with local/regional/national regulations. Pressurized container: do not pierce or incinerate, even after use. Protect from sun exposure. Do not expose to temperatures above 50°C/122°F. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. Do not smoke. Contains Naphtha (petroleum), hydrotreated light, hydrocarbons, C9-C10, n-alkanes, isoalkanes, cycloalkanes, <2% aromatics
