2in1 Paint Lacquer Wilckens Varnish silk mat 375 ml

2in1 Paint Lacquer Wilckens Varnish silk mat 375 ml 2

2in1 Paint Lacquer Wilckens Varnish silk mat 375 ml 3

2in1 Paint Lacquer Wilckens Varnish silk mat 375 ml 4

2in1 Paint Lacquer Wilckens Varnish silk mat 375 ml 5

2in1 Paint Lacquer Wilckens Varnish silk mat 375 ml 6

2in1 Paint Lacquer Wilckens Varnish silk mat 375 ml

Item number: Buntlack-Var_375ml
Manufacturer: Wilckens Farben GmbH
Brand Name:

€5.49

(Base price: €14.64/liter) incl. tax + shipping**

(ready for shipping 1-3 working days)

Wilckens Paint Lacquer Varnish 2in1 silk-mat 375 ml

With the 2 in 1 Paint Lacquer / Varnish, Wilckens offers a water-dilutable dispersion varnish that allows the primer and top coating at the same time. Due to the fact that the Wilckens paint lacquer contains only a small amount of pollutants and solvents, the paint is odorless and can be used for children's toys. After pretreatment, the lacquer is particularly suitable for dimensionally stable wooden components, for primed hard PVC, iron and other metals.

Notice: There are additional sizes available.

Processing advise: Please read the product labeling carefully before you use this product and follow the dangers and safety instructions. The substrate has to be clean, dry, free from grease and rust-free as well as load-bearing. Loosely astrand parts and non-load bearing old parts must be removed with a stripper. Sticking old paints must be sanded well (wear dust mask). Stir well before use. In most cases, the Wilckens 2in1 lacquer can be used without a primer (however please be aware of the exceptions stated by the manufacturer and follow the manufacturer's instructions!).

Exeptions
On wood:
a) For wood with water-soluble, colouring ingredients, always use wood insulating primer, coat knots twice. Pre-treat raw wood outside with wood primer (blue stain protection).
b) Intermediate and final coat with coloured lacquer 2in1, undiluted
On ferrous metals:
a) If higher corrosion protection is required outside, prime 1 x with 2in1 anti-rust primer
b) Intermediate and final coat with 2in1 coloured lacquer undiluted
On zinc/aluminium:
a) Remove the patina and prime with All Primer 3in1
b) Intermediate and final coat with 2in1 coloured lacquer undiluted
On hard PVC:
a) Sand (wear dust mask) and prime with All Primer 3in1
b) Intermediate and final coat with 2in1 coloured lacquer undiluted

Danger/Caution: If medical advice is required, have packaging or identification label ready. Keep out of the reach of children. Read label before use.

Safety data sheets can be found under Info-Download.

Product type: 2 in 1 Paint Lacquer / Varnish
Colour: see selection, silk-mat
Volume: 375 ml (additional sizes available)
Coverage: approx. 12 m²/litre, for one coat, depending on the absorbency of the substrate
Application: indoor and outdoor
Characteristics: excellent light fastness, easy processing and colour progression, primer and top coating at the same time, water dilutable / environmentally friendly, shock resistance, odourless, low-pollutant, low-solvent
Distinctions: certified by "Der Blaue Engel", certified by DIN EN 71.3 (suitable for children's toys. ), light- and weatherproofed (certified by VOB Teil C DIN 18 363)

The drying time depends on the substrate (at 20°C, 65% rel. humidity):

dust dry/grab dry: approx. 2 hours
workable dry: approx. 4 hours
hard-dry: approx. 4 days

Lower temperatures and higher humidity increase the drying time!

further informations

EU Responsible person
Wilckens Farben GmbH
Schmiedestraße 10, 25348 Glückstadt, Germany
info@wilckens.com
+49 4124 / 60 60

Manufacturer
Wilckens Farben
Schmiedestraße 10, 25348 Glückstadt, Germany
info@wilckens.com
+49 4124 / 60 60