My Account 0 Favorites 0 Items 0 Basket 0  Items /  0,00
{ "@context":"http://schema.org/", "@type":"BreadcrumbList", "itemListElement": [{"@type":"ListItem","position":1,"item":{"@id":"\/en\/","name":"Home"}},{"@type":"ListItem","position":2,"item":{"@id":"\/en\/wallpaper\/","name":"Wallpaper"}},{"@type":"ListItem","position":3,"item":{"@id":"\/en\/wallpaper\/wallpaper-brands\/","name":"Wallpaper Brands"}},{"@type":"ListItem","position":4,"item":{"@id":"\/en\/wallpaper\/wallpaper-brands\/leco\/","name":"LECO"}},{"@type":"ListItem","position":5,"item":{"@id":"https:\/\/www.orex.de\/en\/painter-s-glass-non-woven-plus-aqua-leco-coated-white\/a-63216682\/","name":"Painter's Glass non-woven Plus Aqua LECO coated white"}}] }
Painter's Glass non-woven Plus Aqua LECO coated white
Painter's Glass non-woven Plus Aqua LECO coated white
Painter's Glass non-woven Plus Aqua LECO coated white 1 Painter's Glass non-woven Plus Aqua LECO coated white 2 Painter's Glass non-woven Plus Aqua LECO coated white 3

Painter's Glass non-woven Plus Aqua LECO coated white

  • Item number: 3561010080
  • Manufacturer: LECO-Werke Lechtreck GmbH & Co. KG
  • Brand Name:
€239.95
(Base price: €239.95/piece) incl. tax + shipping**
ready for shipping 3 - 5 working days

LECO Painter's Glass non-woven Plus Aqua with water-activated paste finish

LECO Painter's Glass non-woven Plus Aqua is a glass non-woven coated/primed white on both sides with a factory-applied, water-activated paste finish and is versatile due to its properties. It is ideal for smoothing and consolidating interior wall and ceiling surfaces as well as for renovating and refurbishing load-bearing substrates. It can also be used to bridge cracks in cracked or crack-prone substrates. Due to its high-quality primer, it is particularly suitable for use in the commercial sector, as an evenly absorbent paint absorption is guaranteed. This saves time and labour. In addition, the glass non-woven is dimensionally stable, rot-proof and free of PVC, solvents and plasticisers.

Processing:

The substrate must be dry, of the same colour, clean and load-bearing. Old wallpaper and water-swellable coatings must be removed. Cracks, joints and unevenness must be professionally filled with gypsum-based levelling compounds. Pre-treat highly absorbent substrates with deep primer. Cut the strips to the required length, adding 5-10 cm to compensate for the top and bottom edges. Pull the wallpaper through the aqua unit and fold it into loops. The applied paste activates within approx. 1 minute, for ceiling bonding approx. 2-3 minutes activation time is necessary. Do not leave the fabric in the water bath. Apply the strips butt-jointed or with a double-seam cut and press down with a wallpaper spatula until bubble-free. Carefully press the excess into the corners and cut off along the trimming ruler with a sharp cutter knife. When using the double-seam cut, lay strips approx. 3-5 cm overlapping and cut through both strips vertically without damaging the substrate. Remove strips and press cut edges. Remove adhesive on the visible side completely immediately with a damp cloth or sponge. Do not apply below 8°C room/wall temperature. After drying, paint over with dispersion, latex or acrylic paints, as desired and depending on use.

  • Wallpaper type: glass non-woven
  • Size: 50 x 1 m | Rapport: without borders
  • Characteristics: coated on both sides, can be painted over, dimensionally stable, crack-bridging, wet-stable, rot-proof, quick and easy to apply, free of PVC, solvents and softeners 
  • Characteristics: new and originally packed, branded product
  • Colour range: white


  • EU Responsible person
  • LECO-Werke Lechtreck GmbH & Co. KG
  • Hollefeldstraße 41, 48282 Emsdetten, Germany
  • info@leco-werke.de
  • +49 2572 2070
  • Manufacturer
  • LECO
  • Hollefeldstraße 41, 48282 Emsdetten, Germany
  • info@leco-werke.de
  • +49 2572 2070

Suitable accessories

$('.item-id-input-field').hide().find('input').val('63216682')